It comes with instructions and should take less than 60 minutes to install. This is the harness you need if you ordered Polaris kit part number. If you ordered the headlights individually from Polaris, than you need a different harness (see my other listings).
Polaris has come out with new LED headlights that will work for most 2017+ Sportsman 850 and 1000 models along with most 2021+ Sportsman 450 and 570 models. They have made it confusing because there are a couple different part numbers that are very similar, but are wired differently internally. 2884859 will only work on some 2021+ Sportsman 450 and 570 models but it will also work on 2017+ Sportsman 850 and 1000 models (as long as they are NOT a Touring model or High Lifter model). So if you have a 2021 or newer Sportsman 450 or 570 (non-X2 and non-Touring model) or a 2017 or newer Sportsman 850 or 1000 model (non-Touring and non-High Lifter) you should be able to upgrade to their new LED headlights. But if you want them to work best, you will need my custom harness.
These new LED headlights are very cool and MUCH brighter than the Polaris non-LED headlights. Style headlights just contain one. The new LED headlights contain a halo ring, low beam bulb and high beam bulb - all LEDs.
They are much brighter than the old style headlights and should never burn out. Convert your 2-wire plugs on your ATV to the new plugs required for the LED headlights and handlebar pod light. Installation should take less than 60 minutes and it is completely. You do NOT need to cut or tap into any wires on your factory harness.
It does need to use one of the two orange accessory wires that are on your ATV near the battery. It comes with instructions and I will be able to help answer any questions you have. If you are unsure what you are doing, please have your dealer or another professional install it. With this harness the halo ring (on both the headlights and handlebar pod light) will be ON when the ATV is running and the lights are off. When the light switch is on LO, the halo rings will be on along with the low and high beam LEDs in the headlights.
When the light switch is on HI, the halo rings will be on along with the low and high beam LEDs in the headlights along with the high beam LEDs in the handlebar pod light. NOTE: This listing DOES NOT include the headlights. It is only for the harness that is needed to connect the new headlights and pod light. It will not work with the original, non-LED headlights and will only work with the new LED ones part.
What's the difference between these new Polaris LED headlights vs installing aftermarket LED bulbs in the existing headlights? LED bulbs are bright, but they do not project outwards. If you put them in and look at them head on, they will be very bright. But if you are riding your ATV at night with them, they do not illuminate very much in front of you because they do not project outward. Do a Google search and read people's reviews on them.Also, the new Polaris headlights have a halo feature along with low and high beam settings. Aftermarket LED bulbs do not have halo and just have one setting. This harness will ONLY work with the following Sportsman models.
2017+ Sportsman 850 (non-Touring, non-High Lifter). 2017+ Sportsman 1000 (non-Touring, non-High Lifter). 2021+ Sportsman 570 (non-Touring, non-X2).
All other Sportsman models and years it will NOT work with. It will not work with any RZR, General, Ace, Scramble or other UTV or side by side models. The item "Polaris Sportsman 570 850 1000 450 LED headlight kit 2884859 halo HARNESS PT246" is in sale since Monday, October 19, 2020.This item is in the category "eBay Motors\Parts & Accessories\ATV, Side-by-Side & UTV Parts & Accessories\Lighting". The seller is "jrhoads23" and is located in Oconomowoc, Wisconsin. This item can be shipped worldwide.